How to Oil Change Toyota Rav4 2.5L 4 Cylinder 2013 -2016 DIY and save money

How to Oil Change Toyota Rav4 2.5L 4 Cylinder 2013 -2016 DIY and save money - Government Car Auctions

How to Oil Change Toyota Rav4 2.5L 4 Cylinder 2013 -2016 DIY and save money

everybody this is a quick informational
video we’re going to be doing an oil
change on a 2013 Toyota rav4 so first I
like to loosen this a little bit we’re
going to use a fourteen millimeter
socket or fourteen millimeter wrench
drain plug
we’re going to use a 3/8 a trench 3/8
inch wrench to loosen this
now if you’re having a hard time with
this
just watch towards the end of the video
I’ll explain a few tips there now with
an open up our filter here and then
Lotus – gaskets filter and this then
this part screw into the filter and this
is going to drain any remaining oil
that’s in the filter housing so we’re
going to screw this in here
once most of the oil came out we’re just
going to unscrew this and we’re going to
use this oil filter wrench to remove the
filter
you

How to Oil Change Toyota Rav4 2.5L 4 Cylinder 2013 -2016 DIY and save money - Government Auctions Cars For Sale

Car oil toyota
now that you got your filter off you
might as well put your drain plug back
on you don’t want to over-tighten it we
discarded the filter and right here
we’re going to remove this gasket right
clean around here so now we’re going to
put the gasket in here so once we got
the gasket in we’re going to take our
bolts here just cleaning it up a bit
I just hand tighten it and now we’re
going to remove this gasket
well then talk about filter
now what I like to do is I’m going to
pour some oil in here just a little bit
and we’re using 0w 20 full synthetic so
now we’re going to put the filter cap
back on and we’re going to use our
wrench to tighten it the reason why is
you don’t want to use in two three
eighths here to tighten it because this
is basically you can break this part
here and you can damage your cap
all right so we got our oil filter cap
on with the filter new seals new gaskets
and we got our drain plug on so now
we’re going to fill in the oil
it’s 4.6 quarts
alright so we got about four four and a
half quarts in here it’s better not to
overfill and then just add some more oil
when you can get a go off the ramps so
now we’re going to drive it off the
ramps and then let it sit and then
double check the last note on my Toyota
Camry that uses the same assembly the
dealer tightened this plug so hard that
I couldn’t get this loosen so what I did
was I just used a wrench to remove the
whole housing you don’t want to use your
socket here to tighten this into the
engine because you can damage this part
here so hope this helped thanks for
watching and make sure to check out my
other helpful videos

Share
Tagged , , , , , , , , , , , , , , , , . Bookmark the permalink.